Pumptec SPRAYER SUB-ASSEMBLY 350U with regulator Manuel d'utilisateur télécharger pdf (Page 5)

Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614

- Your tank needs to have a ¾” or larger feed port and a ¾” or larger bypass

return port.

- Install 3/4” NPT bulk-head fittings into your tank if either or both ports are

not present.

- Also install ¾” hose-barb fittings into each bulk-head fitting.

- Locate the bypass return port at least 12 inches away from the suction port.

The bypass return port can be located above or below the liquid level.

- Take extra care securing your tank with suitable straps and/or supports that

keep the tank from shifting during transport.

STEP 3

Prepare tank.

¾” feed port

¾” bypass

return port

At least 12”

1 2 3 4 5 6 7 8

Pas de commentaire

Pumptec SPRAYER SUB-ASSEMBLY 350U with regulator Manuel d'utilisateur Page 5